So, kitchen unit assembly completed, it remains to install lights under the cabinets to highlight the working area. How to create a comfortable lighting, so that the light does not blind the eyes, so that the lamps look good or are invisible, and the products on the table top look appetizing? Let's understand these and other issues of furniture lighting for the kitchen.
Kitchen lighting options
Where and where can I install / install lights to illuminate the kitchen?
- Under the wall cabinets: in the corner between the bottom surface of the cabinet and the apron, in the middle of the bottom surface of the cabinet or closer to the end as shown in the photo below;
- Under the top cabinet just above the sink - this light can be either built-in or invoice. It may be brighter than the lights under the cabinets, but at the same time, it is important that it does not blind the eyes. And, of course, the lamp above the sink should not be afraid of moisture and splashing water;
- Above hinged cupboards kitchen;
- Inside cabinets and drawers;
- In the basement of the kitchen to create the effect of "floating" furniture.
The last options are decorative and rather of secondary importance, and the first option is really obligatory for lighting the working surface of the kitchen, that is, worktops and sinks.
Types of furniture lamps and lamps
Lamps for the kitchen, installed under the cabinets are:
- Built-in - they look much more accurate, they are not visible from below, due to this, the light does not hit the eyes, but this light requires more careful planning of works and drilling of the lower parts of the wall cabinets;
- Overhead - such lamps are convenient in changing lamps, they can be installed in any place and you do not need to cut openings for the installation.
And now let's take a closer look at the different types of lamps and lamps:
- Overhead lamps with fluorescent fluorescent lamps. There are special kitchen series with the possibility of installation under the cabinets and above the sink. The power supply is connected only to the first device in the line, while up to 10 lamps can be installed in one line, so there will not be many wires. And we advise you to look for models by type of roof rails, on which you can hang kitchen appliances.
This tabletop lighting is convenient and does not require drilling holes in wall cabinets for installation. All work on the installation of lighting to kitchen furniture can be carried out independently and quickly. To make such a more decorative lighting, overhead lamps can be installed for a special profile. Then the light will not go forward, but the surface of the tabletop will be fully illuminated.
- Lighting for the kitchen based on LEDs is also deservedly popular. Moreover, such systems often use remote panels and touch switches.The main advantages of LED backlighting are as follows: the diodes in the luminaire are arranged very often, which makes the ribbon a completely worthy alternative to the overhead luminaire in terms of brightness of the light flux. The photo below shows how well the working surface is lit.
In addition, these systems are compact, and you can think of a lot of design options for kitchen lighting - with their help, it is easy to form triangular, circular configurations in a variety of colors. Installing LED illumination with his own hands is very simple. However, the LED module is quite expensive, requires connection through a transformer, and the brightness of the LEDs decreases with time.
- You can also use spotlights - spotlights with LEDs to illuminate the worktop and kitchen. They look the same as fluorescent lamps, but do not lose their brightness and do not generate heat. Spot light it can also be of different sizes and types, the spots can be both embedded rotary and overhead. Ideally combined to illuminate angular and linear areas.
Basics of comfortable and beautiful tabletop lighting
- Lighting in the kitchen under the cabinets looks best in the white spectrum. This spectrum does not distort the color and is close to the natural maximum - and this is important when cooking;
- If you want to make the kitchen more cozy and add a feeling of warmth to it, then choose lamps with a traditional warm light;
- It is good when the tabletop is illuminated not by one or two light sources, but by several at once - this way sharp shadows are removed from the working area and the lighting becomes soft;
- Lighting for kitchen cabinets must necessarily match the style of the interior, in harmony with the kitchen furniture and furnishings. For example, in classic design it is better to use neutral white or warm light to illuminate the kitchen under the cabinets, inside them and above the sink. Cold lighting at the top and in the basement is not suitable for every style.
(Rate the material! Already voted:22 average rating: 4,50 from 5)
Loading...
- LED lights for the kitchen from A to Z
- Choosing the perfect chandelier for your kitchen
- DIY lamp for the kitchen - 3 ways and design ideas based on them
- Wiring in the kitchen with their own hands
- Sconces in the kitchen - playing with the light according to the rules
Highlighting the worktop is necessary, with overhead lighting willy-nilly blocking the light, which is inconvenient. Installing luminaires above and inside the lockers is also practical, you can find some small change inside quickly. Decorative decoration with LEDs, of course, at will, only it is important not to get carried away, turning the kitchen into a “New Year illumination”.
Lighting in the kitchen should be different, it is practical, convenient! But still,
I like the lighting under the wall cabinets. You can cook,
to have dinner and not to use the main light, and most importantly, always
have a wonderful feeling of coziness and comfort.